Today’s DIY music project was to add a pickup to my Kmise Ukulele. I have an Ibanez I favor for most things, but the Kmise I’ve set up as my go-to Low G uke. I have a Rubin set up at Low G as well, but I just like the overall tone of the Kmise much more, so I have a strong preference. It’s the one I want to play, and if I want to play it at mics or shows, I need a consistent way to amplify it. The stick on mic proved functional in testing, but unreliable in practice, so I knew I needed to install a proper pickup.
Since my Kmise has a non-standard soundhole that would make it hard to place pickups inside the body, I decided to go with an undersaddle pickup on the grounds it would just be an overall less fiddly installation process.
I recently installed a cheap, unbranded pickup in my kala KA-15S as my test drive, and that proved efficient, but the tuner in the unbranded pickup was off, so I wanted to try a slightly better one in the hopes of a better built-in tuner. Still, I am on a budget and couldn’t bring myself to pay more for a pickup than I paid for the uke, so I eventually grabbed a Joyo pickup off ebay.
And, while I don’t think I’d hesitate to suggest it for standard ukes, I still don’t have a functional tuner. The strings it reads are accurate when compared to my snark tuner, but it can not read the low G string at all, so in the end I guess I have to call the tuner in the Joyo pickup ‘good for standard tuning. Completely useless for anything else.’
That means installing it in my low G uke still doesn’t give me a functional tuner. Still, just to know I can plug my Kmise in if I ever need to is a fair enough deal for $15, so I guess I’m satisfied. It does the job I need it to, just not necessarily 100% of the job it was meant to do.
Ultimately the verdict is that the Joyo Uke pickup is perfectly decent, but maybe steer clear if you use non-standard tunings.